|
AVENDANO J.L.,
FERNANDEZ J.I., SCHEDIN E., KAJBERG J., TATTE E.,
FREHN A.
(LABEIN/Outokumpu Stainless AB/Institut für Elsenhuettenkunde
Aachen – Spain/Sweden/Germany )
Implementation of a non-isothermal material model for austenitic
stainless steels in deep drawing simulation – finding
of optimum process parameters for improving deep drawability
N° 59
AXELSSON
B., ANDERSSON A.
(Volvo Cars Body Components - Sweden)
Virtual pre-matching
N° 28
BACHA
A., KLOCKER H., DANIEL D.
(École des Mines de Saint-Etienne/Alcan - France)
Trimming of aluminium alloy sheets : experimental and numerical investigations
N° 67
BAPTISTA
A.J., CHAPARRO B.M., ANTUNES J.M., RODRIGUES D.M., MENEZES L.F.
(Universidade de Coimbra / Escola Superior de Tecnologia de Abrantes
– Portugal)
Numerical and experimental study on the splitting ring test
for springback prediction
N° 9
BEHRENS
B.A., VOGT O., POELMEYER J.
(IFUM
Hanover - Germany )
Development of a reliable and economic forming process for magnesium
sheet metal
N° 22
BERGER
E., BRENNE T., HEATH A., HOCHCOLDINGER B., KASSEM-MANTHEY K., KESSLER
L., KOCH N., KORTMANN G., KRÖFF A., OTTO T., STEINBECK G.,
TILL E., VERHOEVEN H., VU T.C., WIEGAND K.
(voestalpine Stahl GmbH, AutoForm Engineering Deutschland GmbH,
Engineering System International GmbH, DYNAmore GmbH, Gesellschaft
für Numerische Simulation GNS, ThyssenKrupp Stahl AG, Adam,
Opel AG, Wilhelm Karmann GmbH, Salzgitter Mannesmann Forschung
GmbH, Volkswagen AG, Stahlinstitut VDEh, BMW AG, DaimlerChrysler
AG –
Germany/Australia)
Local strain prediction in small die radii regions - Optimization
of numerical simulation parameters for modelling a part door outer
N° 14
BOUHÊLIER
C., MARCHAND P., SFAR H.
(CETIM – France)
Expert tools for stamping
N° 74
CARLEER
B., SCHIDZIG L., WENDENBURG A.
(Autoform Engineering Gmbh/DaimlerChrysler AG – Germany)
Validation of springback. Influence
and sensitivity on a real world automotive part
N° 69
CAYSSIALS
F., LEMOINE X.
(Arcelor Innovative R&D – France/Belgium)
Predictive model of FLC (Arcelor model) upgraded to UHSS steels
N° 38
CHAMBARD
A., GUYON P., EL KHALDI F., LAMBRIKS M., LING D.
(ESI France/ESI Group – France)
Effective stamping simulation using automatic blank and process
optimization techniques
N° 2
DANIEL
D., LITALIEN P., SHAHANI R.
(Alcan – France)
Challenges for high volume aluminium car body applications
N° 66
DIEHL
A., ENGEL U., GEIGER M.
(University of Erlangen-Nuremberg – Germany)
Investigation of the springback behaviour in metal foil forming
N° 51
GAIED
S., PINARD F., SCHMIT F., ROELANDT J.M.
(UTC / Arcelor Innovation – France)
Numerical determination of specific forming limit curve for
tailor welded-blanks using the major-strain rate criterion
N° 5
GÖSLING
M., HOMBERG W., KLEINER M., KLIMMEK CH.
(University of Dortmund – Germany)
Statistical Modelling of Geometrical Constraints for High-Pressure
Sheet Metal Hydroforming
N° 50
HUSSON
CH., AHZI S., DARIDON L., POIZAT C.
(Institut de Mécaniques des Fluides et des Solides de Strasbourg
/ Laboratoire de Mécanique et Génie Civil de Montpellier – France)
Numerical study of the effects of processing parameters in the
high-speed blanking in the connectic field
N° 20
IRIONDO
E., GONZALEZ B., EGUIA I, GUTIERREZ M., DAEHN G.S.
(LABEIN/The
Ohio State University Colombus – Spain/USA)
Experimental
study of springback elimination using electromagnetic field
N° 44
ISOGAI
E., YOSHIDA T., SUZUKI N., UENISHI A., KURUYAMA Y.
(Nippon Steel Corporation - Japan)
Forming techniques and forming analysis on spring-back simulation
for High Strength Steel in sheet metal forming
N° 25
JURCO
P., BANABIC D.
(Technical University of Cluj-Napoca – Roumania)
A user-friendly programme for analyzing the anisotropy and formability
of sheet metals
N° 35
KOLLECK
R., PFANNER S., LIND C.
(Graz University of Technology/VIF – Austria)
Press Hardening of boron steel sheets – forming and tooling
technology with high potential
N° 19
KONDOU
T., UEMURA G., ITO K., MORI N.
(M&M
Research - Japan)
A
new method to evaluate and compensate springback
N° 10
LAMPRECHT
K., MERKLEIN M., GEIGER M.
(University of Erlangen-Nuremberg - Germany)
Manufacturing Complex Sheet Metal Components by Hydroforming
of Deep-Drawn Preforms
N° 3
LEDOUX
Y., PAIREL E., ARRIEUX R., TEIXEIRA P., SANTOS A.D., DUARTE
J.
(University of Savoie/University of Porto/INEGI – France/Portugal)
A method of springback and tool compensation based on finite
element method and design of experiment.
N° 54
LOVATO
G., GIRAUD H., VAN DER HEIDE E., STAM E.D., HEIKKILÄ I., AKDUT
N., CLARYSSE F., CAENEN P.
(Arcelor/TNO Industrial Technology/SIMR/OCAS – France/ The
Netherlands/Sweden/Belgium)
Influence of lubricants and tool materials upon galling of stainless
steels
N° 13
MATTIASSON
K., SIGVANT M.
(Volvo Cars Safety Centre – Sweden)
On the choice of yield criterion for industrial sheet forming
simulations
N° 48
MERCUZOT
G., HEIN P.
(Arcelor Innovation - France)
Estimation of stamping forces for High Strength Steels
N° 29
OUDJENE
M., MERCIER F., PENAZZI L., BATOZ J.L.
(InSIC / École des Mines d’Albi – France)
Analysis and Design of Laminated Tooling in Sheet Metal Stamping
N° 17
PÖHLANDT
K., TEKKAYA A.E., SCHÖCK J.
(University of Stuttgart / Middle East Technical University Ankara – Germany/Turkey)
Concepts for characterizing plastic anisotropy of sheet metal
N° 57
POTHIER
J.M., ROIZARD X ., HIHN J.Y., BETEAU J.F., MONTEIL G.
(ENSMM/IUT Besançon/ENSIEG – France)
Global analysis method of friction parameters in strip drawing
tests
N° 32
REVUELTA.,
MANNINEN T., LARKIOLA J., KORHONEN A.S.
(Helsinki
University of Technology /VTT Industrial Systems – Finland)
Testing
a combined isotropic and non-linear kinematic hardening model in
forming of austenitic stainless steel
N° 23
ROELOFSEN
M.E., TEN HORN C.H.I.J.
(Corus Research – The Netherlands)
How well do virtual stampings compare to real parts ?
N° 36
SIMON
P., SABOURIN F., MORESTIN F., PHAN L.
(INSA Lyon – France)
Direct identification of a combined hardening with a cyclic
bending test
n° 42
TEIXEIRA
P., BUTUC M.C., SANTOS A.D., ROCHA A.B., GRACIO J.J.
(University of Porto/University of Aveiro/INEGRI – Portugal)
Development of a modular Forming Limit Diagram code and its
application to F.E. simulation
N° 60
TROMPETER
M., KRUX R., HOMBERG W., KLEINER M.
(University of Dortmund – Germany)
Process control strategies for high-pressure sheet metal forming
of large scale structure parts
N° 49
VAN
BAEL A., HE
S., VAN HOUTTE P., TUNCKOL Y., VERBERT J., DUFLOU J.
(Katholieke Universiteit Leuven – Belgium)
Study on the thinning during single point incremental forming of aluminium
sheets
N° 73
WEISS
M., DINGLE M., ROLFE B.F.,HODGSON P.D.
(Deakin University – Australia)
The influence of temperature on the formability of metal/polymer/metal-laminates
N° 30
WICHERN
C.M., RASP W.
(Marx Planck Institute - Düsseldorf - Germany)
A study of roughness anisotropy of surfaces produced by laboratory
and industrial rolling and surfaces generated by mathematical modelling
N° 65
|
